Bear Baby Bottle Washer Manual

Important Safety Notes

High altitude or very low temperature environments may affect the maximum sterilization temperature.

Product Components & Parts

Main body and major components

Accessories and removable parts

Technical Specifications

Control Panel Description

Control panel overview with numbered functions

Installation Guide

1. Connect the drain pipe

2. Place the drain hose correctly

3. Fill the water tank

1. Insert the drain pipe into the drainage port at the back of the machine.
2. Plug the power cord into the machine’s power interface.
3. Place the other end of the drain hose into a sink or drainage container.
4. Fill the water tank by opening the lid or by removing the tank and refilling it separately.

Tip: Fill the water tank to the indicated water level line.

Bottle & Accessory Placement

2

Optional Accessory Disassembly

Press the latches on the bottle holder and nipple holder to remove the corresponding accessories from the lower shelf if needed.

3

Standard Bottle Placement

• Bottle body: Place bottles upside down and align openings with the lower shelf jets.
• Nipple: Place on the designated slots on the lower shelf.
• Bottle cap: Lay flat in the specified position.

4

Breast Pump Placement

Breast pump parts such as diaphragms, valve membranes, breast shields, flanges, pump covers, and bottle bodies can be arranged as shown below.

Breast pump parts layout example 1

Breast pump parts layout example 2

5

Children’s Utensils Placement

Children’s tableware, covers, chopsticks, spoons, and gravity sphere assemblies can be placed on the shelves as shown in the diagrams.

6

Detergent Tablet Use

• Place the detergent tablet directly into the inner chamber before starting a wash cycle.
• Recommended dosage: one tablet per cycle.

Operating Instructions

1. Arrange items according to the placement instructions.
2. Place one detergent tablet into the inner chamber before washing.
3. Fill the water tank to at least the minimum marked line.
4. Press and hold the Power button for 3 seconds to turn on the machine.
5. Select the desired washing program.
6. Press the Start/Pause button to begin.
7. During washing, press the Storage button to add or cancel the 72-hour fresh-air storage program.
8. After drying, wait about 10 minutes before removing items because the unit may still be hot.

Important Operating Precautions

1. To exit before the wash cycle ends, press and hold the Power button for 3 seconds to force shutdown; the machine will stop after automatic draining.
2. To add items during operation, press Start/Pause first, then open the top cover.
3. The drain pipe should be placed horizontally downward, and its height should not exceed half the machine’s height.
4. Do not use concentrated detergents. Use dedicated detergent tablets only.
5. Do not pour water directly into the washing chamber.
6. During washing or drying, the top cover, drain pipe, and ventilation openings are hot; do not touch them.

Program Parameters

Note: The maximum operating temperature for sterilization and storage may decrease with increasing altitude.

Cleaning Guide

1

Exterior Cleaning

Use a soft, damp cloth to wipe the machine body, transparent top cover, water tank, and water tank cover.

How to Remove the Shelf & Spray Arms

1. Lift the upper spray arm assembly vertically upward to remove it.
2. Press the clips on the lower shelf inward in the direction shown in the manual, then lift the lower shelf out.
3. Remove the lower spray arm.
4. Slightly rotate the filter cup to the right and remove it.